Public Lab Research note


The user 'dhaffnersr' has been placed in moderation and will not be able to respond to comments.

DH 4.0 v4 Spectrometer Build Illustrations, Modifications and Specifications

by dhaffnersr | August 06, 2016 05:59 | 805 views | 0 comments | #13337 | 805 views | 0 comments | #13337 06 Aug 05:59

Read more: unstable.publiclab.org/n/13337


The ZEN of simplicity

Measurements between the slit to cmos camera eye are not as critical, as precise alignment of camera to DVD grating (blaze angle) and DVD grating to slit entrance, so with this in mind, the camera is now at 40 deg relative to slit entrance and DVD grating is at same (40 deg) relative to cmos camera eye.

I did find that, the 88mm distance from cmos camera eye to slit was optimal focal length, but component alignments and hardware stability, were the most critical factor in achieving high resolution.

The ruling density of the DVD grating is 8.4 g which equates to 2770 lines per mm. The slit width is now 0.12mm. Project box dimensions are: 190mm X 109mm X 55mm, my spectral bandwidth is now 1.6nm, the equation is as follows: ( R= 1x 0.12 x 2770 = 332.4 R= [λ] 532/332.4 = 1.6nm)

Slit width dimensions are: 25mm in length, Cmos camera(JDEPC-OV05) distance from slit 88mm. Camera angle: 40 degrees, DVD grating angle: 40 degrees. Entrance coupler for slit and cuvette holder: 44mm in Diameter.

Wavelength range = 353nm – 693nm (reliably)

cost_analysis_spectrmtr.png

spectrometer_pics_aug_3.png

DVD_cut_measurement.png

DVD_mount_1.png

cmos_mount_1.png

inside_project_box_bottom_view.png

slit_mount_1.png

project_box_bottom_view.png

cuvette_holder_top_view.png

cuvette_holdet_inside_view.png


Post your response Help out by offering feedback!


Responses (1)


0 Comments

Login to comment.