Public Lab Research note


Bayou St John, first sproutings and west protection berm

by eustatic | June 23, 2014 01:14 | 2,017 views | 4 comments | #10604 | 2,017 views | 4 comments | #10604 23 Jun 01:14

Read more: unstable.publiclab.org/n/10604


Summahtime

Bright summer day, little wind, but big kite and reel power equals map

big PL kit kite
big 3000 reel, churn came in handy
canon 1400is
soda bottle rig

weather data (2 40pm central)

KNEW


there wasn't a lot of wind. the kite would float downwind slowly when the reel was released, but the reel would slowly grind to a halt. I would then crank the reel a few turns, and hold, until the kite climbed to a point where it would pull the reel to turning once again. kind of like a ratchet system with diminishing returns (and taking up a longer and longer amount of time).

i had wanted to use the line counter to measure the length of string, and use geo cam to get an angle on the kite, but my hands were quite occupied with the action of the reel, and directing the kite in low wind.

I moved from the levee to a position under the bridge in order to fly the kite into position where the bridge was visible to the camera.

Continue the knit here

https://mapknitter.org/maps/bayou-st-john-sprouting

all good photos https://drive.google.com/folderview?id=0B32DNGN8pX_XZnFoVW4tU09iQVU&usp=sharing

#




ground angle

sky angle



protection berm middle bottom






4 Comments

facebook convos:

Andy Baker Beautiful! This Saturday 6/21 we built the sand bag breakwater in the mid upper left, just below the bridge. These pictures really capture the waves of material washing in from the dredging contractor's surreptitious dumping under the bridge. I think we are going to have to get another day with a bobcat to move around some of the excess that's impacting the wetland. 13 hours ago · Like · 1

Marilyn Eyer So cool to see our breakwater at work so quickly. Thanks Scott!

Reply to this comment...


ground photos by Kelly Mueller





Reply to this comment...


Reply to this comment...


Reply to this comment...


Login to comment.