Public Lab Research note


Hand-cut or lasercut a simple DIY microscope stage

by warren | April 18, 2018 20:38 | 288 views | 1 comments | #16174 | 288 views | 1 comments | #16174 18 Apr 20:38

Read more: unstable.publiclab.org/n/16174


We're working on simpler and cheaper ways to make good DIY microscopes, working from this @partsandcrafts recommendation -- on this Hackteria page: https://hackteria.org/wiki/Laser-cut_microscopy_stages#LifePatch_DIY_WebCam_Microscope_Stage

microscope

Following up on this post, we'd like to use the same shape for both plates to simplify things, and I was able to drill holes in 2 plates of acrylic with a power drill:

image description

I used a 5/16" bit and a 3/4" paddle bit to cut these, on a drill press, but you could do it with a hand drill too if you clamp things down well.

I also like this because you could do it with wood or masonite as well, pretty easily, although we may ultimately lasercut these.

image description

Files

Here are the lasercut files, including one we prepared for Ponoko.com, although that ended up being ~$18 per pair of plates, so not at all affordable!

We used 6" long, 1/4"-20 bolts and plastic wingnuts to assemble it, and actually skipped the springs from the above design for simplicity. This worked with just a $3 webcam double-sided-foam-taped to the microscope adapter we're using from the OpenFlexure Microscope project!image description

image description

And remarkably, we're able to clearly photograph 2 micron wide ruler markings! Faster, cheaper, better, stronger! (well, maybe not stronger)

image description


I did this Help out by offering feedback!


People who did this (0)

None yet. Be the first to post one!


1 Comments

@partsandcrafts @kgradow1 @wmacfarl @bmela check it out!

Reply to this comment...


Login to comment.