This is a testing site only. See the live Public Lab site here »


pi
pi


Author Comment Last activity Moderation
tapariayogesh "What is the viewing angle of the camera lens? " | Read more » about 3 years ago
warren "Obviously we love to see any improved 3d printed parts and would love to add to the design. Just so people know, we try to print these to be solid,..." | Read more » about 3 years ago
warren "Sadie, just curious, how does your adhere to the board? I love the little grippy bits that hold the lens itself! " | Read more » about 3 years ago
cfastie "`>>So according to this we should be getting about 10% transmission of red light, does that mean I should subtract 10% of each pixel value in..." | Read more » about 3 years ago
nstarli "Thanks for the detailed response Chris, this is super helpful! I really appreciate the feedback. So I have actually been provided the full charact..." | Read more » about 3 years ago
cfastie "I don't know for sure whether your protocol with the RPi camera (use automatic white balance with blue paper) and my protocol with a Powershot (use..." | Read more » about 3 years ago
nipam_bhavsar "Dear Warren, Greetings !!! Thanks for your kind response. We are giving power supply through Laptop's USB port. Camera cable is connected proper..." | Read more » about 3 years ago
nstarli "Thanks for the reply Chris. I have read through pretty much every single one of your posts! So my white balance calibration is the simple one that ..." | Read more » about 3 years ago
cfastie "I am not familiar with your white balance procedure so I don't know how it is affecting your results. If you can manually set the white balance, se..." | Read more » about 3 years ago
warren "Hi! Often the issue is that the ribbon cable is not properly seated, either the big one between the camera and Pi, or the little one between the ca..." | Read more » about 3 years ago
nstarli "Sorry, I meant to include the cfastie colormap image as well: " | Read more » about 3 years ago
MaggPi "Hi, -One option would be to use near infrared LED strip lights similar to what was done here: https://www.youtube.com/watch?v=Y6Vz6sSnXhY&feat..." | Read more » over 3 years ago
cfastie "If you are taking a still photo every hour or so, you might be able to take a flash photo. A split second flash of visible light might not interfer..." | Read more » over 3 years ago
lapcamera "camra giam sat " | Read more » over 3 years ago
MaggPi " look at http://openh.io/rubicon/ " | Read more » over 3 years ago
franklingood2020 "Nice, get waec runs http://www.gistpower.com/ " | Read more » over 3 years ago
liz "Very cool to hear about your installation in Connecticut! Hello from New Jersey and NYC :) i usually hear about pelican cases being used. If the RP..." | Read more » over 3 years ago
KathleenRobinson "wao good to see these type of spy camera " | Read more » over 3 years ago
warren "Oh awesome! " | Read more » over 3 years ago
SadiePrego "Hey no problem! I actually made one myself which works pretty well - no tape needed, here's the file: Webcam_lens_adapter_v2.stl " | Read more » over 3 years ago
warren "Oh sorry! I misunderstood! Here, i've added that too now, but note that I believe I just found a standard m12 on thingiverse and resized it. So the..." | Read more » over 3 years ago
SadiePrego "Hey @warren the .stl file doesn't look like the 3D printed adapter in ur picture (screenshot below), it looks like it might be the adapter for the ..." | Read more » over 3 years ago
SadiePrego "thank u @warren! Going to try it out, unfortunately are makerbot doesnt take gcode which is a lil surprising but I guess cause its a newer model " | Read more » over 3 years ago
delhinsim "It's wow! https://www.nsim.in/digital-marketing-course-in-dubai/ " | Read more » over 3 years ago